編號

中文名稱

英文名稱

IEC 60404-12-1992

磁性材料 第12部分:層間絕緣涂層的溫度能力的評定方法的指南

Magnetic materials; part 12: guide to methods of assessment of temperature capability of interlaminar insulation coatings

IEC 60664-3-2003

低壓系統內設備的絕緣配合.第3部分:防污染用鑄封或壓模涂層的使用

Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution

IEC 60684-3-300-2002

絕緣軟管.第3部分:各種型號軟管規范.第300篇:無涂層的玻璃纖維編織軟管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated

IEC 60684-3-343 to 345-2002

絕緣軟管.第3部分:各種型號軟管規范.第343至345篇:無涂層可擴張編織的乙烯三氟氯乙烯纖維軟管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated

IEC 61249-5-1-1995

互連結構用材料 第5部分:有或無涂層的導電箔和薄膜分規范集 第1節:銅箔(用于生產覆銅基材)

Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)

IEC 61249-5-4-1996

互連結構用材料 第5部分:有或無涂層的導電箔和薄膜分規范集 第4節:導電油墨

Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks

IEC 61249-8-7-1996

互連結構用材料 第8部分:非導電薄膜和涂層分規范集 第7節:打印油墨

Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: MaRKing legend inks

IEC 61249-8-8-1997

互連結構用材料 第8部分:非導電薄膜和涂層分規范集 第8節:非永久高聚物涂層

Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings

IEC/TR 60344-2007

低頻電纜和電線未涂層和涂層銅導線的直流電阻計算.應用指南

Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide

ISO 10247 AMD 1-2006

傳送帶.涂層特性.分類.修改件1

Conveyor belts - Characteristics of covers - Classification; Amendment 1

ISO 105-X10-1993

紡織品 色牢度試驗 第X10部分:紡織品顏色向聚氯乙烯涂層遷移的評定

Textiles; tests for colour fastness; part X10: assessment of migration of textile colours into polyvinyl chloride coatings

ISO 10684-2004

緊固件.熱浸鍍鋅涂層

Fasteners - Hot dip galvanized coatings

ISO 11507-2007

色漆和清漆.暴露涂層到人工風化環境.暴露在熒光紫外線燈和水環境

Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water

ISO 11644-1993

皮革 涂層粘著牢度測定方法

Leather; test for adhesion of finish

ISO 11950-1995

冷軋電鍍鉻/氧化鉻涂層鋼板

Cold-reduced electrolytic chromium/chromium oxide-coated steel

ISO 11998-2006

色漆和清漆.測定涂層的耐濕性和清潔度

Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings

ISO 12683-2004

機械鍍鋅涂層.規范和試驗方法

Mechanically deposited coatings of zinc - Specification and test methods

ISO 13779-2-2000

外科植入物 羥基磷灰石 第2部分:羥基磷灰石覆涂層

Implants for surgery - Hydroxyapatite - Part 2: Coatings of hydroxyapatite

ISO 13779-4-2002

外科植入物.羥磷灰石.第4部分:涂層粘結強度的測定

Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength

ISO 14373-2006

電阻焊接.無涂層和有涂層低碳鋼的點焊程序

Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels

ISO 14654-1999

鋼筋混凝土用環氧樹脂涂層鋼

Epoxy-coated steel for the reinforcement of concrete

ISO 14655-1999

預應力混凝土用環氧樹脂涂層鋼絞線

Epoxy-coated strand for the prestressing of concrete

ISO 14656-1999

鋼筋混凝土用環氧樹脂涂層鋼的環氧樹脂粉末和密封材料

Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

ISO 14788-2005

連續熱浸鍍鋅(5%)鋁合金涂層鋼薄板

Continuous hot-dip zinc-5% aluminium alloy coated steel sheet

ISO 14923-2003

熱噴涂.熱噴涂層的表征和試驗

Thermal spraying - Characterization and testing of thermally sprayed coatings

ISO 14924-2005

熱噴涂.熱噴涂層的后處理和加工

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

ISO 15234-1999

色漆和清漆 甲醛涂層和三聚氰胺涂層的試驗 小型試驗室中甲醛濃度的測定

Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber

ISO 15720-2001

金屬涂層 孔隙率檢測 用涂膠塊陽極電解法檢測基體上金或鈀涂層的孔隙率

Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography

ISO 15721-2001

金屬涂層 孔隙率檢測 用硫酸/二氧化硫蒸汽法檢測基體上金或鈀涂層的孔隙率

Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour

ISO 15741-2001

色漆和清漆 海上和近海的非腐蝕氣體鋼管內側的減小摩擦涂層

Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases

ISO 16053-2004

涂料和清漆.外部木材用涂層材料和涂覆系統.自然老化試驗

Paints and varnishes - Coating materials and coating systems for exterior wood - NatuRAL weathering test

ISO 16172-2006

波紋鋼管用連續熱浸金屬涂層鋼板

Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe

ISO 16276-1-2007

防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂應力)的評定和驗收標準.第1部分:脫落測試

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing

ISO 16276-2-2007

防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂應力)的評定和驗收標準.第2部分:劃格測試和X切割測試

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing

ISO 16773-1-2007

涂料和清漆.高阻抗涂層樣品的電化學阻抗頻譜(EIS).第1部分:術語和定義

Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions

ISO 16773-2-2007

油漆及清漆.高阻抗涂層試樣的電化學阻抗譜(EIS).第2部分:數據采集

Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data

ISO 16962-2005

表面化學分析.用輝光放電光發射光譜測定法分析鋅和/或鋁基金屬涂層

Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry

ISO 17233-2002

皮革.物理和機械試驗.表面涂層冷裂溫度的測定

Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings

ISO 17834-2003

熱噴涂.高溫下抗腐蝕耐氧化保護涂層

Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures

ISO 17872-2007

色漆和清漆.腐蝕試驗用金屬板涂層劃痕標記導則

Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

ISO 17925-2004

鋼上鋅和/或鋁基涂層.單位面積涂層質量和化學組分的測定.重量分析法、感應耦合等離子體原子輻射光譜測定法

Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry

ISO 20502-2005

細陶瓷(高級陶瓷、高級工業陶瓷).用劃痕試驗測定陶瓷涂層的粘附性

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing

ISO 20566-2005

色漆和清漆.用實驗室洗車臺測定涂層系統耐劃痕性

Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash

ISO 20567-1-2005

色漆和清漆.涂層的耐石片劃性的測定.第1部分:多沖擊試驗

Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing

ISO 20567-2-2005

色漆和清漆.涂層的耐石片劃性的測定.第2部分:導向沖擊體單沖擊試驗

Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body

ISO 2063-2005

熱噴鍍.金屬涂層和其他無機覆層.鋅、鋁及其合金

Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys

ISO 22168-2006

道路車輛.影響光源光色的涂層的保持試驗.試驗方法

Road vehicles - Holding test of coatings influencing the colour of light emitted by light source(s) - Test methods

ISO 22778-2006

金屬涂層.在鐵和鋼表面上物理蒸發鎘沉淀涂層.規范和試驗方法

Metallic coatings - Physical vapour-deposited coatings of cadmium on iron and steel - Specification and test methods

ISO 22779-2006

金屬涂層.鋁的物理蒸汽沉積涂層法.規范和試驗方法

Metallic coatings - Physical vapour-deposited coatings of aluminium - Specification and test methods

ISO 2411-2000

橡膠或塑料涂覆織物 涂層粘合強度的測定

Rubber- or plastics-coated fabrics - Determination of coating adhesion

ISO 2810-2004

色漆與清漆.涂層的自然風化.暴露和評定

Paints and varnishes - Natural weathering of coatings - Exposure and assessment

ISO 3185-1993

航空航天 強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型的普

Aerospace; bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 3186-1994

航空航天 強度等級1250 MPa～1800 MPa、有涂層或無涂層、金屬材料制成的標準柄、短或中等長度MJ螺紋、大徑

Aerospace - Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions

ISO 3193 Technical Corrigendum 1-1992

航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型普

Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPA; dimensions; technical corrigendum 1

ISO 3193-1991

航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型普

Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 3202-1997

航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、帶內偏高扭矩十字槽或不打滑扳動結

Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions

ISO 3203-1993

航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、普通雙

Aerospace; bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 5470-2-2003

橡膠或塑料涂層織物.耐磨損性測定.第2部分:馬丁代爾研磨器

Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader

ISO 5856-1991

航空航天 強度等級小于或等于1100 MPa、金屬材料制成、有涂層或無涂層、帶有中或短長度MJ螺紋、大徑桿型及

Aerospace; screws, 100 normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 6451-1982

塑料涂覆織物 聚氯乙烯涂層 熔融快速檢驗法

Plastics coated fabrics; Polyvinyl chloride coatings; Rapid method for checking fusion

ISO 6452-2007

橡膠或塑料涂層織物.汽車內裝飾材料霧氣凝結特征的測定

Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles

ISO 7590-2001

鋼絲繩芯輸送帶 總粗度及涂層厚度測定方法

Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness

ISO 7623-1996

鋼絲繩芯輸送帶 繩芯與涂層之間粘合力試驗 原始試驗和熱處理

Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment

ISO 7989-1-2006

鋼絲和鋼絲制品.鋼絲的有色金屬涂層

Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles

ISO 7989-2-2007

鋼絲和鋼絲制品.鋼絲的有色金屬涂層.第2部分:鋅或鋅合金涂層

Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc-alloy coating

ISO 8078-1984

航空航天工藝 鋁合金的陽極化處理 無著色涂層的硫酸工藝規程

Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, undyed coating

ISO 8079-1984

航空航天工藝 鋁合金的陽極化處理 帶著色涂層的硫酸工藝規程

Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, dyed coating

ISO 8094-1984

鋼絲繩芯輸送帶 繩芯與涂層間粘合強度試驗

Steel cord conveyor belts; Adhesion strength test of the cover to the core layer

ISO 8096 Technical Corrigendum 1-2005

防水服用橡膠或塑料涂層織物.規范.技術勘誤1

Rubber- or plastics-coated fabrics for water-resistant clothing - Specification; Technical Corrigendum 1

ISO 8179-2-1995

球墨鑄鐵管 外部鍍鋅 第2部分:終飾層用富鋅涂層

Ductile iron pipes - External zinc coating - Part 2: Zinc rich paint with finishing layer

ISO 8501-1-2007

涂料和相關產品使用前鋼襯底的制備.表面清潔度的目測評估.第1部分:未涂覆鋼襯底和徹底清除原有涂層后鋼襯底

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

ISO 8501-2-1994

涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分:局部去除原有涂層后鋼材的除銹等級

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings

ISO 8980-4-2006

眼科光學.半成品眼鏡片.第4部分:防反射涂層的規范和試驗方法

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings

ISO 9211-1-1994

光學和光學儀器 光學涂層 第1部分:定義

Optics and optical instruments - Optical coatings - Part 1: Definitions

ISO 9211-2-1994

光學和光學儀器 光學涂層 第2部分:光學特性

Optics and optical instruments - Optical coatings - Part 2: Optical properties

ISO 9211-3-1994

光學和光學儀器 光學涂層 第3部分:環境穩定性

Optics and optical instruments - Optical coatings - Part 3: Environmental durability

ISO 9211-4-2006

光學和光學儀器.光學涂層.第4部分:規定的試驗方法

Optics and optical instruments - Optical coatings - Part 4: Specific test methods

ISO 9254-1993

航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、普通在

Aerospace; bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 9255-1993

航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準柄、短或中等長度MJ螺紋、普通在

Aerospace; bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 9256-1993

航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、大六角

Aerospace; bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 9514-2005

色漆和清漆.多組分涂層系統適用期測定.樣品的制備和處理以及試驗指南

Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing